High-precision dispensing technology and robotics by Musashi Engineering for viscosities from 1 to 1,000,000 mPa·s. From air-pulse and non-contact high-speed jet dispensers through volumetric plunger, 2K, and progressive cavity / screw systems to desktop robots, inline cells, and genuine consumables.
DISPENSING & AUTOMATION · SWITZERLAND & RHINE VALLEY
The dispensing principle follows your application.
As the Swiss partner for Musashi Engineering based in Widnau (St. Gallen Rhine Valley), we support industrial manufacturers across Switzerland, Eastern Switzerland, and Liechtenstein in engineering high-precision dispensing and automation solutions – from nano-dots in semiconductor and electronics assembly to gap fillers, thermal interface materials, sealing beads, and conformal coating. Because Musashi develops controllers, valves, dispensing robots, and software in-house, dispensing control (such as Synchro Speed™) and axis motion work together seamlessly.
Typical Industries in Switzerland & the Rhine Valley
dropflow GmbH, Widnau (SG) – process engineering, dispensing trials, robot integration, plus genuine syringes and precision needles for Switzerland & Liechtenstein
Product and Service Areas.
Six matched system families plus genuine consumables and inline cells by Musashi Engineering.
01 / AIR-PULSE DISPENSING CONTROLLERS
Pneumatic Time-Pressure Dispensers
Digital air-pulse dispensers for low- to high-viscosity media at manual workstations and Industry 4.0 production lines. Patented air-pulse stabilization (PAT), automatic vacuum suck-back against dripping, and remaining-volume compensation ensure consistent shot weights until the syringe is empty.
MS-1 / MS-1DML-6000XML-8000XSuper Σ CMIV
Viscosity
1 – 500,000 mPa·s
Precision
Sigma Correction / PAT
Interfaces
I/O, RS-232C, USB, LAN
FOR SELECTIONSpecify syringe size, viscosity behavior (e.g., pot-life change for 1K/2K), and required line communication interface.
Models & Technical Key Data
MS-1 / MS-1D: Compact entry-level unit with digital display and foot switch for laboratory and manual assembly.
ML-6000X: Industry 4.0 dispenser featuring air-pulse stabilization (PAT), remaining-volume detection, and multi-channel memory.
ML-8000X: 4.3" color touch panel, time-dependent pressure compensation for pre-mixed 2K adhesives, USB recipe transfer, and process logging.
Super Σ (Sigma) CMIV (CM4): Three Sigma functions (automatic empty-head volume correction, auto vacuum control, remaining-amount alarm), Eco mode (> 90 % compressed-air savings on standby), LAN & USB-C.
High-speed jetting systems apply adhesives, underfill, conductive silver paste, silicone, UV media, or reactive PUR hot-melt without surface contact in the nanoliter range. Eliminating Z-axis travel allows delicate substrates, tight cavities, and even angled or overhead positions to be dispensed accurately.
AeroJetSuperJet 2Super Hi JetHot Melt Super Jet
Shot Frequency
Up to 500 Hz (drops/s)
Viscosity
1 – 1,000,000 mPa·s
Droplet Volume
From 0.5 nanoliters
FOR SELECTIONAlign medium, viscosity, nozzle heating requirements, minimum dot/line width, and cycle-time target.
Models & Technical Key Data
AeroJet: High-speed non-contact jet for 1 to 700,000 mPa·s, heater up to 80 °C, 100 channels, and optional ProfiNet interface.
SuperJet 2: Up to 500 Hz operating frequency, multi-angle jetting, 3.5" color display, 24 V DC, USB/RS-232C & ProfiNet.
Super Hi Jet / Hyper Jet: Engineered for high-viscosity media up to 1,000,000 mPa·s and up to 100 °C; rapid rod change, also available as Solder Jet for solder paste.
Hot Melt Super Jet: Temperature-controlled jetting system specifically designed for reactive PUR hot-melts and thermoplastic adhesives.
Digitally controlled positive-displacement plunger dispensers meter exact fluid volumes mechanically via a precision piston. The dispensed volume remains constant even when viscosity or ambient temperature fluctuates – ideal for underfill, LED potting, battery electrolytes, oils, and pastes.
MPP-1MPP-1 SystemMPP-3 / MPP-5
Repeatability
Up to ±0.5 %
Viscosity
1 – 1,000,000 mPa·s
Volume Range
From 1 pL up to 5 mL
FOR SELECTIONDefine target shot volume, viscosity range, and cleanroom or process requirements.
Models & Technical Key Data
MPP-1 (Measuring Master): Volumetric plunger dispenser for 1 to 100,000 mPa·s, up to 400 parameter sets, and tool-free wet-part cleaning.
MPP-3 & MPP-5: High-capacity digital plunger dispensers for larger shot volumes (up to 5 mL) and viscosities up to 1,000,000 mPa·s including error diagnostics.
SMP-3 (Nano Master): Ultra-precision micro-syringe dispenser for solvents and low-viscosity fluids starting from 1 picoliter (1/1,000,000 mL) with suck-back control.
Systems for accurate metering and bubble-free mixing of 2K epoxies, polyurethanes, silicones, and gap fillers – even when resin and hardener differ widely in viscosity. Available as dual-plunger or dual progressive-cavity systems fed from cartridges, pressure tanks, or pails.
FOR SELECTIONSpecify mixing ratio, pot life, viscosities of both components, and container format upfront.
Models & Technical Key Data
MPP3-2K Dispenser: Volumetric 2K plunger dispenser with independently driven heads for variable mixing ratios (±1 % at 25 µL), ideal for gap fillers, thermal pastes, and sensor potting.
Dual-MohnoMaster: 2K progressive-cavity dual head for high-speed sealing beads and high flow rates with chemically resistant wetted parts.
Material Supply: Configurable as 2K cartridge, pressure tank, pail, or dual barrel-pump system.
Engineered for high-viscosity, pasty, and particle-filled media such as solder paste, conductive silver adhesive, thermal interface materials (TIM), epoxy resins, or greases. The clog-free feed mechanism with Synchro Speed™ and Auto-Increment prevents filler separation and stringing in dot and bead applications.
FOR SELECTIONReview filler content, particle size, viscosity, and target flow rate together.
Models & Technical Key Data
ScrewMaster 3: Clog-free screw dispenser for particle-filled pastes (solder paste, silver paste, PUR hot-melt) with Synchro Speed™, Auto-Increment, and quick-release wetted parts.
ScrewMaster High Volume: Designed for high volumetric flow rates in continuous bead dispensing and potting.
MohnoMaster (Monomaster): Low-shear progressive-cavity dispensing for shear-sensitive media, fed from small syringes up to 600 mL cartridges, pails, or tanks.
01Fluid, viscosity (1 to 1,000,000 mPa·s), pot life, and fillers
02Target volume (from nL/pL), dot diameter, or line width (from 18 µm)
03Component geometry, clearance, and target cycle time (up to 500 Hz)
04Manual workstation, benchtop/gantry robot, or fully automated inline cell
Three steps to the right dispensing solution.
01 / STEP
Capture Dispensing Task
Record fluid properties, technical datasheet, part geometry, and required metering accuracy as the starting point.
02 / STEP
Select Dispensing Principle
Match air-pulse, non-contact jet, plunger, 2K, or progressive-cavity dispensing technically to your material and cycle time.
03 / STEP
Configuration, Trials & Support in Switzerland
Specify dispensing head, controller, genuine consumables, and robotics including feasibility testing and local support from Widnau (SG).
BEFORE YOUR INQUIRY
Ask concretely. Decide with confidence.
Which Musashi dispensing principle fits our application? +
Selection depends on viscosity, shot volume, and cycle time: air-pulse dispensers (MS-1, ML-6000X, ML-8000X, Super Σ CMIV) cover general-purpose tasks; jet dispensers (AeroJet, SuperJet 2, Super Hi Jet) dispense non-contact at up to 500 Hz from 0.5 nL; volumetric plunger dispensers (MPP-1, MPP-3/5, SMP-3) achieve ±0.5 % repeatability independent of viscosity shifts; and for particle-filled pastes or 2K media, ScrewMaster 3, MohnoMaster, MPP3-2K, or Dual-MohnoMaster are deployed.
What does the Synchro Speed™ function do on Musashi dispensing robots? +
Because Musashi develops both the dispensing heads and the desktop/gantry robots (ShotMaster SX, ShotMaster Omega, ImageMaster 350PC Smart, CrossMaster Omega X) in-house, Synchro Speed™ regulates discharge rate synchronously with the robot's path velocity. This keeps bead width uniform during acceleration, deceleration, and around tight corners.
Can we also source genuine Musashi syringes, needles, and spare parts through dropflow? +
Yes. As Musashi Engineering's Swiss partner, we supply not only complete dispensers, robots, and inline cells (FAD 2500, FCD 1000) but also all genuine consumables including UV-blocking, anti-static, or heated barrels, burr-free precision needles, plungers, and needle valves (NCV-17).
Where can I source and test Musashi Engineering dispensing technology in Switzerland? +
Your partner in Switzerland is dropflow GmbH, headquartered in Widnau in the St. Gallen Rhine Valley. We support industrial manufacturers in the Rhine Valley, Eastern Switzerland, Liechtenstein, and all of Switzerland in evaluating the optimal dispensing principle, running feasibility and dispensing trials with your original fluid, integrating desktop robots or inline machines, and supplying ongoing consumables and spare parts.
Which industries in Switzerland and the Rhine Valley use Musashi micro-dispensing systems? +
With shot volumes down to the nanoliter and picoliter range and repeatability up to ±0.5 %, Musashi systems are widely deployed in Swiss medical technology and diagnostics, electronics and semiconductor manufacturing (SMT/PCB, underfill, glob top, conformal coating), sensors, photonics and optics, precision mechanics and watchmaking, as well as e-mobility and battery production.
APPLICATION FIRST
Your Application. Our Next Step.
Inquiry for Musashi Engineering Switzerland.
Fluid, component, desired dispensing principle, and process conditions help us make an initial technical qualification. We then coordinate system configuration, dispensing trials, and quotations directly with you.
